INTRODUCTION and WHAT YOU WILL DO (Job Responsibilities)
Job Overview
This position is primarily responsible for applying coats of paint to decorate and protect interior or exterior surfaces, trimmings and fixtures of stations and other structures by performing the following duties.
Responsibilities
Clean steel mechanically as needed to remove all mill scale, then wash with Hydrite or other brand of cleaning solution to remove oil and dirt. Some jobs may specify sandblasting for cleaning operation. Thoroughly inspecting all components for defects in materials or previous operations workmanship and notify the supervisor of any such defects.
Prime all bare steel with industrial grade primer, 2-part Urethane, 2 mils minimum dry coat.
Apply finish coat with an industrial grade, 2-part Poly-Urethane, 4 mils minimum total dry coat thickness.
Inspects work, after curing, to ensure quality expectations are met. Mil thickness of the painted parts is checked against specifications.
Mark identification such as work order numbers or job number where required.
Touch up paint on stations as they are assembled on the shop floor as needed.
Additional duties as assigned.
WHO YOU ARE (Qualifications)
Required Skills / Qualifications / Certifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Must be able to certify to wear respirator for painting.
Must be safety conscious, with an excellent safety record.
EDUCATION AND/OR EXPERIENCE:
High school diploma or GED and one year certificate from college or technical school; or two years related experience and/or training at such places as auto paint body shops or industrial painting operations; or equivalent combination of education and experience.
LANGUAGE SKILLS:
Ability to read and interpret documents such as engineering prints, safety rules, operating and maintenance instructions, and procedure manuals.
MATHEMATICAL SKILLS:
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
REASONING ABILITY:
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
COMPUTER SKILLS:
To perform this job successfully, an individual should have knowledge of Microsoft AX Software.
OTHER SKILLS AND ABILITIES:
Familiar with standard concepts, practices, and procedures within the particular field.
Relies on experience and judgment to plan and accomplish goals.
Works under general supervision.
OTHER QUALIFICATIONS:
Forklift Certification (will provide)
Must be eligible to work in the United States of America.
SPECIALIZED EQUIPMENT
Overhead crane
Forklift
Pallet jack
Spray equipment and booths
Fresh air mask and system
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to talk, hear, read, stand, bend, lift, twist, reach with hands and arms to push and pull.
The employee is also required to climb or balance and stoop, kneel, crouch, or crawl.
The employee must frequently lift and/or move up to 70 pounds. When lifting or moving heavy items, the employee will use proper lifting techniques and equipment.
Specific vision abilities required by this job include close vision, distance vision and color vision.
WORK ENVIRONMENT:
The work environment characteristics described here are…